RSS Feed
Knowledgebase : Explorer > Explorer 700
 


Wind load for the E700 antenna on a pole mount. The tests performed with angles towards the wind of 45deg and 90deg at wind speeds of 48-50 m/s (the max speed of the wind tunnel) where the antenna and pole mount showed no problems.
Knowledge base – Problems/solutions Date: <03- 2008>   Product Name & Type: Explorer 700 TT-3620   Subject: Bluetooth and 3,1khz ca...
Knowledge base – Problems/solutionsDate: July - 2007  Product Name & Type:EXPLORER 700 Additional RJ11/2wire interface specifications: Feeding: Voltage: 60V Current: 20mA Ringing: Voltage: 53Vpp Frequency: 25Hz Signal shape: Trapez Dial ton...
The EXPLORER 700 pole mount (with the antenna mounted) has been tested at wind speeds of up to 172 km/h or 48 m/s.
The Nera Worldset has been tested on the EXPLORER™ 700 ISDN port 1 on both Premium and Standard Voice, running the EXPLORER™ 700 – sw. ver. 1.02 with no special settings!
Know bug in the current software version 1.02 for Explorer 700.The terminal does not to detect if the antenna is disconnected.  If the antenna is disconnected while the terminal is ON, the power for the antenna will still be on (18vdc)  - No alarm is rais...
Explorer 700 - WLAN not working.If the WLAN is not visible on the wireless network list.  Please check that the right country is selected in the WLAN interface settings.See User Manual: Configuring the WLAN interface. 
How to Enable / Disable the SIM Pin for Explorer 700There are two wayes of enabling / disabling  the SIM Pin.1: Run: the Inmarsat LaunchPad. Open: Terminal/Require PINs. Select: SIM Pin. Select: Enable. Enter the SIM Pin. (you will find the SIM PINs on th...
It seems impossible to fully charge the the Explorer700 battery The problem is a miscommunication between the battery intelligence, and the battery charging circuit. In reality the battery is fully charged after the normal charging time (Approximately 2.5...
For the short cable (app. 40cm) and for 10m G02232-D is usedFor a 30m cable RG 223/U is usedFor a 60m cable RG214/U is usedFor a 100m cable SA 07272 is usedAll cables are from HUBER SUHNER.
Help Desk Software by Kayako Fusion